01698 535392

TecnoSoft

SPD by Technosoft

Management software for SterilDisk and PasteurDisk dataloggers

The SPD software is the management program for the SterilDisk, PasteurDisk, SterilCyl, PasteurCyl, SterilCyl Radio and PasteurCyl Radio dataloggers.

It's easy to use, intuitive and full of options. The communication with the devices is made by the Disk Interface (serial or USB), that allows to start the loggers and download the data from them, setting also the start delay and some notes. Data are then displayed on graph, with zoom function, and table, exportable in Excel.

The software calculates the F0 and the PU (pasteurisation units) of the process to evaluate the level of sterilisation or pasteurisation. In the configuration window it is possible to set the parameters for the F0 and PU calcualtion according to the process you want to monitor. The software, moreover, allows print out of complete reports with graph, data table, device serial number, and other notes added by the user.

The SPD software supports the wireless datalogger for pasteurisation and sterilisation too, PasteurCyl Radio and SterilCyl Radio. Through the USB Radio Receiver you will be able to receive data real time from your process. You will see the data one after another, you will be able to assign an alarm profile (on F0/PU values and temeprature values to be reached) and you can choose up to 4 sensors (that can be selected any time) to display a graph both for the temperature and the dynamic F0/PU curve.

It is possible to download the user's manual in PDF format and the last software update (the full software is necessary to run properly). Download the file .zip and follow the instructions in the README.TXT inside it.

Operating systemsWindows XP / Vista / 7
Data managementMissions sorted by start date and logger serial number
Data displayGraph (with zoom) and table (exportable into Excel) and report of all the data printing 
Multi Graph DisplayTwo or more missions can be displayed on a single graph
Real time displayWith the radio function it displays real time the temperature graph and the F0 or PU graph of up to 4 loggers choosed among all the loggers received.
F0 and PUAutomatically calculates the F0 and PU and the Z and N parameters of the formula can be set 
CFR21 Part 11 compatibilityData cannot be changed 
CommunicationUSB 
LanguagesEnglish, Italian, French, German, Spanish