For thermocouple sensor calibration of the complete EaziVal system the temperature of the thermocouples must be maintained in a stable state. EaziVal provides multi-point calibration at 'high', 'low' and 'check-point' temperatures with the scale and offset values automatically calculated for each sensor. The Anville 300 bath has an operating range from 40°C to 325°C. The large sensor capacity of three 3mm, three 6mm and one 10mm diameter holes make the unit particularly suitable for thermocouple calibration.

Anville Series 300 bath

• Part number Anville 300
• Temperature range 40°C to 325°C
• Stability ±0.03°C
• Block uniformity ±0.2°C
• Accuracy ±0.3°C
• Display resolution ±0.1°C
• Set point resolution ±0.1°C
• Measuring zone 0 to 50mm from base of well
• Time to stability 10 minutes (after set temperature is reached
• Heating time 9 minutes (from 40°C to 300°C)
• Cooling time 18 minutes (from 300°C to 100°C)
• Immersion tube 110mm deep
• Fixed insert large sensor capacity of three 3mm, three 6mm and one 10mm diameter holes
• Dimensions 203.2 x 203.2 x 222.25 mm deep
• Power supply 230VAC/110VAC switchable
• Weight 4.0kg
• Operating ambient 10°C to 40°C
• Supplied with two year warranty, fits sterilizer validation kit case or soft case available